Panasonic VL-V900 Installation Manual page 63

Setup Tool
5
5-2-1. How to Setup
<Situation2> If you don't know where the each cable connect to.
1. Set the Apartment mode and room number
of each Room monitor.
Push 3 buttons and Power on
Save: Save the programing date
in the internal memory
*See 5-10 Main Monitor programing
3. Wiring the Control Box and Lobby Station.
Set and send the programing date
#+PASS CODE +Bell
(123456)
↑ *See 5-8 Lobby station programing
to the Control Box.
Call any number:
Send the programing date
2. Wiring the Control Box, Distribution Box and Monitor.
Send the each room programing date to the Control
Box.
Port?
Control Box
Distribution Box
VL-V700
VL-V701
Set : Save in the internal memory and
send the saved date to the Control Box
4. Connect the PC and Control Box vis USB and
download the Programing date.
Programing date should be back up by the Installer or Dealer.
No. 301
Port?
59