Table of Contents
Advertisement
v Display or Change Bootlist
v Display or Change Diagnostic Run Time Options
v Display Previous Diagnostic Results
v Display Resource Attributes
v Display Service Hints
v Display Software Product Data
v Display System Environmental Sensors
v Display Test Patterns
v Display USB Devices
v Download Microcode
v Fibre Channel RAID Service Aids
v Flash SK-NET FDDI Firmware
v Format Media
v Gather System Information
v Generic Microcode Download
v Hot Plug Task
v Identify Indicators
v Identify and System Attention Indicators
v Local Area Network Analyzer
v Log Repair Action
v Periodic Diagnostics
v PCI RAID Physical Disk Identify
v Process Supplemental Media
v Run Diagnostics
v Run Error Log Analysis
v Run Exercisers
v Save or Restore Hardware Management Policies
v SCSI Bus Analyzer
v SCSI RAID Physical Disk Status and Vital Product Data
v SCSD Tape Drive Service Aid
v Spare Sector Availability
v SSA Service Aid
v System Fault Indicator
v System Identify Indicator
v Update Disk-Based Diagnostics
v Update System or Service Processor Flash
v 7135 RAIDiant Array Service Aids
v 7318 Serial Communication Network Server
Add Resource to Resource List
Use this task to add resources back to the resource list.
Note: Only resources that were previously detected by the diagnostics and deleted from the Diagnostic
Test List are listed. If no resources are available to be added, then none are listed.
AIX Shell Prompt
Note: Use this service aid in Online Service Mode only.
This service aid allows access to the AIX command line. To use this service aid, the user must know the
root password (when a root password has been established).
92
pSeries 610 Model 6C3 and Model 6E3 User's Guide
Advertisement
Table of Contents
