Miscellaneous Solutions - Valueline VL PPC 6015 VW 10 User Manual

Ipc with touch screen
Table of Contents

Advertisement

2637_en_D
Make sure the VL IPC is running and disconnected from any hardware other than
UPS power and status lines.
Remove the operating system generic UPS driver configuration: from the VL IPC
click the "Start... Control Panel... Power Options... UPS" tab, click the "Select"
button and choose None as the manufacturer. Click the "Finish" button and then
the "Apply" button (not the "OK" button).
Reconfigure the operating system generic UPS driver (see "QUINT-DC-UPS...
installation" on page 3-31). Once the "Apply" button is selected, the system will
take approximately 25 seconds to update.
Figure 4-5
"Power Options Properties" dialog box
The VL IPC reads the state of the Bat.-mode signal through the configured serial
port. If everything is connected, configured and operating correctly, then AC power
is displayed as the current power source.
Make sure the UPS battery is charged (Bat.-Charge LED on the QUINT-DC-UPS...
is off).
Remove power from the UPS, which changes the state of the Bat.-mode signal to
display On Battery as the current power source. Make sure the VL IPC shuts down
30 seconds after the configured time has expired.
Reconnect pertinent UPS and VL IPC hardware and reconnect the UPS to the
power supply.
4.3.3

Miscellaneous solutions

What is the correct type of CompactFlash memory?
Industrial fixed media CompactFlash cards must be used in the Valueline IPC
CompactFlash slots. Though the brand does not matter, the type of card does.
Therefore, as the Windows® operating system will not boot from consumer grade
removable media CompactFlash cards in a Valueline IPC, they cannot be used.
Is the CompactFlash memory hot-swappable?
Never hot-swap CompactFlash cards as they are considered as hard drives in a
Valueline IPC. Therefore, hot-swapping CompactFlash cards in a Valueline IPC
could lead to data loss or a corrupted CompactFlash card.
Valueline IPC will not start an operating system from a USB port.
Contact technical support.
Maintenance
4-9
PHOENIX CONTACT

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

2913181

Table of Contents