Valueline VL PPC 6015 VW 10 User Manual page 64

Valueline IPC
3-40
PHOENIX CONTACT
3. Install a CompactFlash card in the proper slot. The card should be inserted so the lip is
toward the connectors. Push the card straight into the device until seated.
When inserting a CompactFlash card, use the slot 0 for bootable CompactFlash cards and
the slot 1 for data-only CompactFlash cards.
4. To select a bootable CompactFlash, the BIOS must be properly configured (see "BIOS
configuration" on page 4-6).
To remove a card from slot 0, use a small needle nose pliers and carefully pull the card
straight out. To remove a card from slot 1, use the ejector mechanism. Push the button next
to the slot, and then pull the card straight out of the slot.
2637_en_D