Valueline VL PPC 6015 VW 10 User Manual page 36

Valueline IPC
3-12
PHOENIX CONTACT
Individual adjustment can be made along each edge on a percentage basis. 100% is at the
edge of the screen, 50% is approximately 0.5 in. before an edge (on the screen) and 200%
past an edge where the cursor is not visible. In addition, the cursor display position can be
shifted along either the X or Y axis, displayed by pixel.
200% 50%
Figure 3-10 Edge compensation example
Click the "Support Edge Compensation" button to activate/deactivate the edge
compensation utility.
To adjust all edges of the display "in," click the "-10%" button. Each successive click brings
the edge in 10%. To adjust all edges outward, click the "+10%" button. The relative position
of each edge is shown on the sliders above. To return all sliders to 100%, click the "Default"
button.
2637_en_D