Using Compactflash Cards; Figure 3-42 Compactflash Slots - Valueline VL PPC 6015 VW 10 User Manual

2637_en_D
3.10

Using CompactFlash cards

Valueline IPC CompactFlash
used once the Valueline IPC is powered-down for ease of CompactFlash card
exchangeability.
To install a CompactFlash card follow these steps:
NOTE:
CompactFlash cards are handled like hard drives in a Valueline IPC and are, therefore, not
hot-swappable. Ejecting a CompactFlash before the VL IPC is powered-down could result
in data loss.
1. Turn the VL IPC off.
2. Open the access door at the rear of the VL IPC (see Figure 3-42).
Core2 Duo and
Celeron Processor
CompactFlash
Slot 0
CompactFlash
Slot 1
Eject Button
CompactFlash
Slot 1
Figure 3-42 CompactFlash slots
You may need to remove some cables for easier access to the CompactFlash slots.
®
slots are not hot-swappable. The eject button is only to be
CompactFlash
Eject Button
CompactFlash
Slot 1
Startup and Operation
Atom Processor
3-39
PHOENIX CONTACT