Table of Contents
Advertisement
2637_en_D
3.
Select a device boot order (first, second or third) then press the <Enter> key.
a) Select a device:
Hard Disk
USB-FDD
PXE Boot X2:ETH
If a bootable CompactFlash card is installed, CF Slot 0 and/or CF Slot 1 will appear as
selections.
Additional items will be listed if an expansion chassis is installed with one or two
network cards that support network booting.
b) Press the <Enter> key to accept the device or press the <Esc> key to abort the
change.
4.
Boot Other Device looks for any bootable device in case the first, second and third
boot devices fail or are not available. To enable this feature:
a) Use the arrow keys to highlight Boot Other Device and press the <Enter> key.
b) Select Enabled then press the <Enter> key to accept the change.
5.
When more than one hard disk device type or CDROM device type is connected to the
VL IPC, they can be prioritized in the boot order. To do that:
a) From the Advanced BIOS Features menu, select either Hard Disk Boot Priority
or CD-ROM Boot Priority using the arrow keys.
b) Follow the Item Help directions on the right side to move (prioritize) a highlighted
device up or down in the list.
c) Press the <Esc> key to save the change and exit the submenu.
6.
When ready, press the <F10> key to save changes, exit and continue booting the VL
IPC.
Manual boot mode
Manual boot mode overrides automatic boot mode and allows users to boot from external
USB devices such as a memory stick, CompactFlash card, CD-ROM, etc. To boot from an
external device:
1.
Connect a bootable USB device before booting. Otherwise, it will not be listed in the
Boot menu.
2.
Power-up or restart the VL IPC and, when the first black screen with white text appears,
press the <F12> key about once every second to initiate the Boot menu.
3.
Use the arrow keys to highlight the desired device under Hard Disk or CDROM, then
press the <Enter> key to boot from that device.
4.2.2
Power on after power fail options
The Valueline IPC provides three options for power-up behavior once power is applied. To
change the setting:
1.
Select Integrated Peripherals.
2.
Select SuperIO Device.
3.
Select PWRON After PWR-Fail.
4.
Select:
a) OFF - for the VL IPC to remain OFF.
b) ON - for the VL IPC to power-up and reboot when power is restored (the default
mode).
CDROM
PXE Boot X3:ETH
Disabled
Maintenance
4-7
PHOENIX CONTACT
Hide quick links:
Advertisement
Table of Contents
