Single Display Configuration; Figure 3-20 Single Digital Display Selected - Valueline VL PPC 6015 VW 10 User Manual

Valueline IPC
3-20
PHOENIX CONTACT
3.7.2

Single Display configuration

The VL IPC can be configured with or without a touch screen display and it can function with
an auxiliary, external display (see "External display" on page 2-7). The single display
options are:
– Notebook: the default for Valueline touch screens.
The touch function of the touch screen will be active when Monitor or Digital Display is
selected as the single Display Device. If the touch screen function is not desired, it can be
disabled (see "Mouse modes" on page 3-5).
– Monitor: this is for an analog display connected to the VGA port.
– Digital Display: this is for a digital display connected to the DVI-D port. If a digital display
is not connected to the Valueline IPC, this option will not appear.
Figure 3-20 Single digital display selected
The selected options appear in the top tab of the dialog box.
2637_en_D