Valueline VL PPC 6015 VW 10 User Manual page 33

Startup and Operation
Click the "Linearization" button to start the utility. The display will change to a white screen
with either 9 or 25 blinking touch points.
Figure 3-7 9 Points Calibration screen
Touch and hold each point until the point stops blinking. If a touch point is not touched within
30 seconds, the utility is closed, returning to the "Touchkit... Tools" dialog box. A progress
bar at the bottom of the screen indicates the time remaining.
3-9
2637_en_D PHOENIX CONTACT