Valueline IPC
3-2
PHOENIX CONTACT
3.2
Power switch
With all components and I/O properly connected, press the power switch in the direction of
the dot and release it. It is a momentary switch and returns to its original position. To turn
power off, press and hold the switch for about one second and then release it to perform an
orderly shutdown of the Windows operating system.
Figure 3-2
Power switch
The first time the VL IPC boots, the Windows operating system displays the software license
and activation (see "Software license and activation" on page 3-2). Upon completion of
boot-up, the VL IPC runs the Touchkit screen calibration (see "4 Points Calibration" on
page 3-8).
3.3
Software license and activation
®
Use of the Microsoft
operating system is subject to the licensing limitations specified by
the Microsoft Software License. Phoenix Contact is not responsible and cannot be held
liable for proper use of the operating system or any other software installed on the computer
unless that software is a product developed and manufactured by Phoenix Contact.
R
P W
D
H D
N
R U
R
R O
E R
I D
D V
X 8
A
V G
X 9
1
O M
0 C
X 1
C
V D
2 4
R :
W E
P O
B
U S
E T
H
X 5
X 2
B
U S
H
X 7
E T
X 3
B
U S
X 4
B
U S
X 6
Power switch
B
A
–
+
2637_en_D