Installing Pci Cards; Cover Removal - Valueline VL PPC 6015 VW 10 User Manual

Valueline IPC
2-8
PHOENIX CONTACT
2.2.3

Installing PCI cards

Installing a PCI card in the optional PCI slots is done as follows:
NOTE:
Use standard ESD precautions when removing or installing PCI cards to avoid damage to
the cards and the VL IPC.
The PCI card option is not available with the Atom standard chassis.
1. Ensure the card does not exceed the maximum dimensions for the intended slot (see
"Computer data" on page A-2).
2. Remove power from the unit.
Figure 2-6

Cover removal

3. Place the unit on a soft cloth on a flat, horizontal surface with the ribbed surface (cover)
up.
4. Remove the four Phillips-head screws, 1, from the cover, 2, and remove the cover.
Do not remove the tamper-proof (Torx
PCI Slot 0
PCI Slot 1
®
) screws, 3.
1
2
3
2637_en_D