Checking The Oil Level; Changing The Pump/Gear Oil (Does Not Apply To Mc 2C-180/700 Pe / Mc 3C-165/810 Pe) - Nilfisk-Advance MC 2C-180 PE Instructions For Use Manual

MC DE, MC PE, MC PE PLUS

6.2.3 Checking the oil level

(does not apply to
MC 2C-180/700 PE /
MC 3C-165/810 PE)
6.2.4 Changing the pump/
gear oil (does not apply
to MC 2C-180/700 PE /
MC 3C-165/810 PE)
12
1. Check whether the oil level
is in the middle of the oil
inspection glass, oil cup or
dip stick. Top up with oil if
necessary (see section 8.3
for type of oil).
1. Before changing the oil,
allow the pressure washer to
become warm.
2. Unscrew/open the plugs/lid at
the top and the bottom of the
pump.
3. Allow the oil to drain into a
suitable container (min. 1 l
capacity) and dispose of oil in
compliance with regulations.
4. Mount plug at the bottom of
the pump.
5. Fill pump with fresh oil (see
8.3 for oil type and quantity).
6. Check the oil level (see
6.2.3).
Original Instructions