Supported Interfaces; Downloading Snmp Management Information Base File; First Steps To Troubleshoot A Remote System - Dell EMC PowerEdge VRTX User Manual

• Sensor information
• Firmware build information

Supported Interfaces

• CLI RACADM
• Remote RACADM
• Telnet RACADM
racdump includes the following subsystems and aggregates the following RACADM commands. For more information about
racdump, see the RACADM Command Line Reference Guide for CMC in PowerEdge VRTX.
Table 41. Racadm commands for subsystems
Subsystem
General System/RAC information
Session information
Sensor information
Switches information (IO Module)
Mezzanine card information (Daughter card)
All modules information
Power budget information
KVM information
NIC information (CMC module)
Redundancy information
Trace log information
RAC event log
System event log

Downloading SNMP Management Information Base File

The CMC SNMP Management Information Base (MIB) file defines the chassis types, events, and indicators. CMC enables you to
download the MIB file using the web interface.
To download the CMC's SNMP MIB file using the CMC web interface:
1. In the left pane, click Chassis Overview → Network → Services → SNMP.
2. In the SNMP Configuration section, click Save to download the CMC MIB file to your local system.
For more information about the SNMP MIB file, see the Dell OpenManage Server Administrator SNMP Reference Guide at
dell.com/support/manuals.

First Steps to Troubleshoot a Remote System

The following questions are commonly used to troubleshoot high-level issues in the managed system:
• Is the system turned on or turned off?
• If turned on, is the operating system functioning, not responding, or stopped functioning?
• If turned off, did the power turn off unexpectedly?
188
RACADM Command
getsysinfo
getssninfo
getsensorinfo
getioinfo
getdcinfo
getmodinfo
getpbinfo
getkvminfo
getniccfg
getredundancymode
gettracelog
getraclog
getsel