Table of Contents
Advertisement
Item
Indicator, Button, or Connector
11
Server modules
Minimum CMC Version
The following table lists the minimum CMC version required to enable the listed server modules.
Table 4. Minimum CMC Version for server modules
Servers
PowerEdge M520
PowerEdge M620
PowerEdge M820
PowerEdge M630
PowerEdge M830
PowerEdge M640
The following table lists the minimum CMC version required to enable the listed I/O moduless.
Table 5. Minimum CMC Version for I/O modules
IOM Switches
R1 VRTX 1Gb Pass-through
R1-2401 VRTX 1GbE Switch
R1-2210 VRTX 10Gb Switch
Supported Remote Access Connections
The following table lists the supported Remote Access Controllers.
Table 6. Supported Remote Access Connections
Connection
CMC Network Interface ports
Serial port
Supported Platforms
CMC supports modular servers designed for the PowerEdge VRTX platform. For information about compatibility with CMC, see the
documentation for your device.
Description
Up to four PowerEdge M520, M620, M630, or M640 server modules or 2 M820
server modules configured for the enclosure.
Features
•
GB port: Dedicated network interface for the CMC web interface.
•
DHCP support.
•
SNMP traps and e-mail event notification.
•
Network interface for the iDRAC and I/O Modules (IOMs).
•
Support for Telnet/SSH command console and RACADM CLI commands including
system boot, reset, power-on, and shutdown commands.
•
Support for serial console and RACADM CLI commands including system boot, reset,
power-on, and shutdown commands.
•
Support for binary interchange for applications designed to communicate with a binary
protocol to a particular type of I/O Module.
•
Serial port can be connected internally to the serial console of a server, or I/O module,
using the connect (or racadm connect) command.
•
Provides access only to the active CMC.
Minimum version of CMC
CMC 1.36
CMC 1.36
CMC 1.36
CMC 2.00
CMC 2.00
CMC 3.00
Minimum version of CMC
CMC 1.20
CMC 1.20
CMC 2.00
19
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
