Configuring Standard Schema Active Directory - Dell EMC PowerEdge VRTX User Manual

Table 22. : Default Role Group Privileges
Role Group Default Privilege Level
1 None
2 None
3 None
4 None
5 None
NOTE: The Bit Mask values are used only when setting Standard Schema with the RACADM.
NOTE: For more information about user privileges, see

Configuring Standard Schema Active Directory

To configure CMC for an Active Directory login access:
1. On an Active Directory server (domain controller), open Active Directory Users and Computers Snap-in.
2. Using the CMC Web interface or RACADM:
a. Create a group or select an existing group.
b. Configure the role privileges.
3. Add the Active Directory user as a member of the Active Directory group to access CMC.
Configuring Active Directory With Standard Schema Using CMC Web Interface
NOTE: For information about the various fields, see the
1. In the left pane, go to Chassis Overview, and then click User Authentication → Directory Services. The Directory Services
page is displayed.
2. Select Microsoft Active Directory (Standard Schema). The settings to be configured for standard schema is displayed on the
same page.
3. In the Common Settings section, specify the following:
• Select Enable Active Directory and enter the timeout value for Active Directory in the AD Timeout field.
• To obtain the Active Directory Domain Controllers from a DNS lookup select Look Up Domain Controllers with DNS, and
then select one of the following:
– User Domain from Login — to perform the DNS lookup with the domain name of the login user.
– Specify a Domain — enter the domain name to use for the DNS lookup
118
Permissions Granted
• CMC Login User
• Chassis Configuration Administrator
• User Configuration Administrator
• Clear Logs Administrator
• Chassis Control Administrator (Power Commands)
• Server Administrator
• Test Alert User
• Debug Command Administrator
• Fabric A Administrator
• CMC Login User
• Clear Logs Administrator
• Chassis Control Administrator (Power Commands)
• Server Administrator
• Test Alert User
• Fabric A Administrator
CMC Login User
No assigned permissions
No assigned permissions
Types of
CMC Online Help .
Users.
Bit Mask
0x00000fff
0x00000ed9
0x00000001
0x00000000
0x00000000