Connect The Ethernet Management And Idrac Interfaces; Connect The Ethernet Management And Idrac Interfaces; Connect Single-Controller Management Ports - Dell SC8000 Deployment Manual

Connect the Ethernet Management and iDRAC Interfaces

The iDRAC and Ethernet management ports must be connected to a management network.
The ETH 0 port supports system login and access to the management software. It is also

used to send email, alerts, SNMP traps, and system data using Phone Home.
The iDRAC connection provides access to the controller for system information and

diagnostics.

Connect Single-Controller Management Ports

Connect the controller Ethernet management and iDRAC ports to a management network.
1 Connect the 1 Gb ETH 0 (port 0) to an Ethernet switch.
2 Connect the iDRAC port to the Ethernet switch using a 1 Gb Ethernet cable.
Figure 105. Single Controller Management Connections
Dell Compellent
Switch (Corporate/Public Network)
Controller
iDRAC
1 Gb ETH 0 Port
Connect the Ethernet Management and iDRAC Interfaces
1 3 0 2
IPC MGMT
121