Discovery-Manually Adding Devices - Black Box BOXILLA BXAMGR User Manual

CHAPTER 6: DISCOVERY—ADDING DEVICES
6.2 DISCOVERY—MANUALLY ADDING DEVICES
Sometimes an administrator may want to add a device manually, for example, where a device is on a different subnet to the Boxilla
Manager and multicast routing not enabled to this subnet.
To manually add a device, click on the "Add Manually" tab on the discovery page. This brings up the page shown in Figure 20.
Enter the IP address of the device to be added and click on "Get Information." This causes Boxilla to retrieve the device's information
if reachable. If Boxilla has no valid path on the network to the device (or IP address is not for an InvisaPC device)
the system will return a message of "device not reachable."
The administrator can give the device a name and check that the device's details are correct if required to ensure it is the correct
device (IP address, Serial Number and Model type). To manage this device, click on "Manage Device" button as shown in Figure 21.
28
FIGURE 20. DISCOVERY—MANUAL ADD
FIGURE 21. DISCOVERY MANUAL ADD & MANAGE DEVICE
1.877.877.2269 BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269