Table of Contents
Advertisement
CHAPTER 10: DKM INTEGRATION
10.1 INTRODUCTION
This chapter considers integration aspects of Boxilla. The chapter is divided into two main sections, which include activities
on the DKM end and on the Boxilla side. The chapter describes the configuration elements for Boxilla and DKM.
Boxilla manages DKM connections towards InvisaPC appliances by means of Virtual CPUs. Virtual CPUs are set up via the DKM
Java Tool and assigned to the physical CPUs that are connected to the InvisaPC receivers. Once the InvisaPC connections are
attached to the DKM CONs, the switch will set up the DKM connections on the DKM CONs and also "echo'" this activity onto the
network where Boxilla will recognize it and remotely initiate the desired connections on the attached InvisaPC Receivers.
The above can be achieved by following these steps.
1. Create and manage VCPU based connections on Java based DKM Utility
2. Add and manage DKM Switches under Boxilla
3. Manage CPU Ports ( Physical and virtual) by attaching InvisaPC Connections
4. Create and manage preset connections and/or custom sources from managed sources and destinations.
10.2 STEPS TO CREATE AND MANAGE VCPU CONNECTIONS ON THE UTILITY
Assumed: You have the desired InvisaPC connection setup.
Open the Java Tool and select "Activate Online Configuration," which is the 6th button in from the left. Select Yes when you are
asked to confirm.
Click "CPU Devices," which is a menu item under "Definition" on the lower left side. Next, select the "New Device" button
on the lower right side of the screen. Select "Create a virtual CPU."
FIGURE 45. JAVA TOOL SCREEN
1.877.877.2269
BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269
51
Advertisement
Table of Contents
