Table of Contents
Advertisement
CHAPTER 4: INITIAL INSTALLATION
TABLE 2. PANEL COMPONENTS
COMPONENT
Serial port
Network port
Power switch
3-prong outlet
CONNECT THE POWER
1. Locate the AC line cord.
2. Attach the AC line cord to the power supply connector on the rear of the unit.
3. Power up the unit by turning on the power switch on the back of the unit.
4.2 LED IDENTIFICATION
Two LEDs are built into the RJ-45 connectors on the Boxilla Manager. The definition of the operation of these LEDs is shown in
Table 3.
TABLE 3. RJ-45 CONNECTOR LEDS
LED
INDICATION
Green ON
Speed
Amber ON
OFF
Amber blinking
Activity
OFF
16
DESCRIPTION
DB9 male console
1G Ethernet RJ-45 connector
ON/OFF switch
100–240 VAC, 50-60 Hz
MEANING
1 Gbps link
100 Mbps link
10 Mbps link
Valid link
No link
1.877.877.2269
FIGURE 7. BOXILLA REAR PANEL
BLACKBOX.COM
Power ON/OFF switch
Power supply connector
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269
Advertisement
Table of Contents
