Table of Contents
Advertisement
CHAPTER 7: DEVICES
On the InvisaPC Receiver, when the user attempts to log in, the login will now take the following steps in this order:
1. The login credentials are checked to see if the user is configured locally on the Receiver. If the user exists, they will be logged
in as normal. If not, then step two will occur. If Broker Connection Type is set to "None," the InvisaPC Receiver at login will only
attempt to authenticate the user locally. This is the default setting.
2. If the Broker Connection Type is set to "Web Access Server," the Receiver will attempt to launch a connection to an RD Web
Access server. This will allow the user to be Authenticated against the Domain Controller (Active Directory), allowing the user to
access Virtual Desktop Pools and Personal Virtual desktops.
7.4 DEVICES—STATISTICS
The Device Statistics page provides an overview of the operation of the managed domain as shown in Figure 27. It provides an
overview of the device on-line and off-line (not contactable). Then a table of devices is displayed showing what user is logged in to
what device, when they logged in and how long they were logged in.
FIGURE 27. DEVICE STATISTICS
1.877.877.2269
BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269
37
Advertisement
Table of Contents
