Table of Contents
Advertisement
CHAPTER 4: INITIAL INSTALLATION
4.1 HARDWARE DESCRIPTION
A Boxilla manager is supplied with the items shown in Table 1.
TABLE 1. WHAT'S INCLUDED
ITEM
Boxilla Unit
IEC power cord
(4) rubber feet for tabletop deployments
(1) ESD
screw
Quick Start Guide
Once the contents of the Boxilla package have been verified, the first task is to configure the IP address of the unit. This can be set in two
ways: (1) using the serial port and (2) using the network port via browser.
NOTE: Only the Network port pointed to in the above diagram (on the right-hand side when you look at the Boxilla unit from the
front) is currently operational. The other port is reserved for a future feature.
CONNECTORS NEEDED FOR INSTALLATION
• Serial Port
• Network Port
• Power connector
Reserved for
future use
Serial
Network
DVI test
USB
USB
interface
3.0
2.0
FIGURE 6. BOXILLA FRONT PANEL
1.877.877.2269
BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269
15
Advertisement
Table of Contents
