How To Configure @Home Cable Service - Compex CGX3224 User Manual

Chapter 7 Configuring Your Wide Area Network
7.4.2

How to Configure @HOME Cable Service

Many broadband services require a simple DHCP request for connection. Two
such cable services are Optus@Home and Roger@Home.
Description of parameters
System Name
System Contact and
Location
Procedures
To configure @HOME Cable Service,
1. Follow the steps stated in "Configuring for Singapore Cable Vision (SCV)
Service" on the previous section.
2. Next, click on System Config at the Command window under the
SYSTEM TOOLS menu and enter the required entry as shown.
3. Click on Apply and then Save button to set the System Configuration.
4. Reboot your device.
You can obtain this information from your ISP.
You may leave it as it is or fill in your ISP contact
and location information. They are for your future
reference only.
35