Appendix I
Panel Views & Descriptions
Features
5
100M LED
6
POWER LED
7
Console Port
8
Reset Button
9
Mode Button
10
2 Open
Expansion
Module Slots
11
24 RJ45
10/100Mbps
Ports
12
Power Socket
Steady Green
The Mode button is toggled to 100M mode.
Off
The Mode button is either toggled to ACT or FULL
mode.
Steady Green
Power supply is in normal condition.
A serial 9 Pin (DB9) socket is connected to PC COM Port for
monitoring the switch.
By pushing the reset button once,
•
The switch will clear all previous temporary error
•
Switch would be re-configured with the settings stored in non-
volatile flash memory.
By pressing it, you will be able to view the status of the selected mode
(Between ACT, FULL and 100M LEDs).
Types of Optional Module used:
•
1000Base-LX Gigabit on Fiber Module
•
1000Base-SX Gigabit on Fiber Module
•
100Base-FX Single Mode Fiber Fast Ethernet Module
•
100Base-FX Multi-Mode Fiber Fast Ethernet Module
•
1000Base-T Copper Module
Use UTP/STP network cables to connect
•
10 Base-T
•
100 Base-TX
All ports will detect and automatically switch to uplink mode when
connected to a switch/hub.
Power input at the range of 100V - 240V AC, 50-60Hz.
Status and Indication
76