Trunk Configuration; Simple Application On Vlan Configuration - Compex CGX3224 User Manual

24+2 gigabit snpm switch with integrated router

Hide thumbs Also See for CGX3224:

Table of Contents

Chapter 5

Configure Compex CGX3224 using Web Interface

5.2.1

Please refer to "Application on Virtual LAN" on Page 71.

5.3

Trunk Configuration

Port Trunking is the ability to group together several switch ports to increase the

bandwidth between Compex CGX3224 and other switch. This is an inexpensive method

to increase throughput between switches.

NOTE

To avoid broadcast storms, or looping in your network while configuring trunks,

you need to disable/disconnect all the ports that you wish to add/remove from

both sides of the trunk. Once you have finished configuring trunking, enable/re-

connect the ports.

Procedures

1. Go to Trunk Config from the Command window.

2. You can choose up to 4 ports for trunking by selecting '-' as 'T'.

3. Click on Apply button to make the configuration effective and save the latest

setting.

NOTE

You may set up to 4 trunking ports for the switch.

Table of Contents

Show Quick Links

Table of Contents