Appendix III TCP/IP Configuration
AIII-2 Windows XP/NT
When using these operation systems, you also need to set your IP addresses to dynamic.
For example, under Windows XP,
1. Select View Network Connections
and then click on LAN Area
Connections. Activate Properties
with the right mouse key and the
following window will appear:
2. Click
on
the
Protocol Properties. Enter
an IP addresses in the field
provided.
3. Press OK to make possible
changes effective. Now the
configuration of the TCP/IP
protocol under Windows XP
is finished, and is time to
check if your computer gets
the right IP address.
Internet
81