Compex CGX3224 User Manual page 23

Chapter 4 Access to Web-based Interface
The Main menu includes four sections in the Command Menu Window, namely
CONFIGURATION, ADVANCED, SYSTEM TOOLS and HELP. The overall
descriptions for individual sub-functions are listed as shown:
CONFIGURATION menu
•
Port Configuration – configuration for communications via network
Please refer to Section 5.1 Port Configuration on Page 16
•
VLAN Configuration – setup Virtual LAN, whether in tagged or untagged-based
Please refer to Section 5.2 Virtual LAN Configuration on Page 18
•
Trunking Configuration – Extend the limitation of bandwidth
Please refer to Section 5.3 Trunk Configuration on Page 19
•
DHCP Configuration – setup, reserve or activate DHCP
Please refer to Section 5.4 DHCP Configuration on Page 21
•
WAN Configuration – support Static, Dynamic and PPP over Ethernet services
Please refer to Section 5.5 WAN Configuration on Page 25
•
NAT Configuration – increase security by preventing unauthorized access through
WAN
Please refer to Chapter 6 NAT Configuration on Page 27
ADVANCED menu
•
STP Configuration - discovers and eliminates redundant paths in the network
topology
Please refer to Section 8.1 STP Configuration on Page 39
•
IGMP Configuration - allows the device to forward multicast traffic intelligently
Please refer to Section 8.2 IGMP Configuration on Page 44
•
Stack Configuration – allows user to enable the stacking function of the switches
Please refer to Section 8.3 Stack Configuration on Page 47
•
SNMP Configuration – monitors and oversees network
Please refer to Section 8.4 SNMP Configuration on Page 51
•
RMON Statistic – enables various network monitors and console systems to
exchange network-monitoring data
Please refer to Section 8.5 RMON Statistic on Page 52
13