Installation - RAIS VISIO 3-1 NS User Manual

English

Installation

It is important that the stove is installed properly for the sake of both the environment
and safety.
When installing the stove, all local rules and regulations, including those referring to
national and European standards must be respected. Local authorities and a chimney
specialist should be consulted before installation.
The stove may only be installed by a qualified / competent RAIS dealer / installer or the
warranty will be invalid.
It is prohibited to carry out unauthorised alterations to the stove
NOTE!
Before the stove can be used, the local chimney sweep must be notified.
There should be an ample supply of fresh air in the installation room to ensure good
combustion- if necessary through an airbox connection . Note that any mechanical ex-
haust ventilation e.g. an extraction hood may reduce the air supply. Any air vents must
be placed in such a manner that the air supply is not blocked.
Alternatively, the stove can be supplied with fresh air directly from the outside through
a flexible piping fitted to the damper (see Air system section).
The stove consumes 10 to 20 m ³ of air per hour.
The floor must be able to carry the weight of the stove and the chimney. If the existing
floor construction doesn't meet this requirement, suitable measures (e.g. load distribut-
ing plate) shall be taken to achieve it.
Consult with a construction expert.
The stove should be placed on non-flammable material.
The stove must be placed at a safe distance from flammable materials.
It must be ensured that flammable objects (e.g. furniture) are not placed closer than the
distances indicated in the following section concerning installation (fire risk).
If the stove is installed on a flammable floor, the size of the non-flammable surface
underneath the stove must be in accordance with national / local regulations.
When you choose where you want to place your RAIS /
of the heat distribution to other rooms. Then you will get the most pleasure from your
stove.
See the manufacturer's plate on the stove.
Upon receiving, the stove must be inspected for defects.
The stove may only be installed by a qualified/competent RAIS dealer/installer.
NB!!
See www.rais.com for list of dealers
attika
RAIS/ - User manual for VISIO 3-1
attika
stove, you should think
15 15