Sip Local Survival Configuration Examples; Configuring Local Sip Server To Operate In Alone Mode - HPE FlexNetwork MSR Series Configuration Manual

Figure 759 Applying the call rule set
Table 283 Configuration items
Item
Rule Set ID
Applied Globally
Register users bound to
the rule set

SIP local survival configuration examples

Configuring local SIP server to operate in alone mode

Network requirements
Configure the local SIP server on Router C to operate in alone mode so that the phones register with
the local SIP server and they can make and receive calls through the local SIP server.
Description
Displays the call rule set ID.
•
Enable—Applies the call rule set to all registered users.
•
Disable—Specifies that the call rule set does not apply to any registered
users.
•
In the Available register users field, select registered users and click <<
to add them to Register users bound to the rule set.
•
In the Register users bound to the rule set field, select registered users
and click >> to unbind them.
Users in the Available register users field are added in
373
User management.