HPE FlexNetwork MSR Series Configuration Manual page 43

Figure 15 Integrated service management
•
To change the URL address of the card, click
the field and click
•
Correctly set the URL address of the card, and then connect the card to the LAN to which the
administrator belongs. On the page as shown in
linked to the specified URL address pops up, and then you can log in to the Web interface of this
card to manage it.
Figure 16 Changing card URL address
to apply the configuration or click
28
of the target card. Enter the URL address in
to cancel the modification.
Figure 15, click the Manage button, a page