Toyota Highlander Hybrid 2017 Owner's Manual page 614

614
8-2. Steps to take in an emergency
Lay the tire on the ground with
4
the outer surface (valve stem)
facing up.
Before raising the tire, make
5
sure that the hoist assembly is
perpendicular to the wheel
opening. (Try to place the tire
directly beneath the vehicle,
near where the wire cable is
hanging from.)
Using the jack handle and adapter socket, tighten the tire clamp
6
bolt by turning it clockwise until the tire is in the correct position and
two clicks are heard as the jack handle skips.
Confirm it is not loose after
7
tightening:
Push and pull the tire
1
Try rotating
2
Visually check to ensure tire is
not hung on surrounding parts.
If looseness or misassembly
exists, repeat steps
Repeat step
8
Stow the jack and all tools.
9
HIGHLANDER_HV_U (OM48F12U)
to .
2 7
, any time the tire is lowered or disturbed.
7
Valve stem