Toyota Highlander Hybrid 2017 Owner's Manual page 288

Table of Contents

Advertisement

288
4-5. Using the driving support systems
Operation conditions of each function
Lane departure alert function
This function operates when all of the following conditions are met.
• LDA is turned on.
• Vehicle speed is approximately 32 mph (50 km/h) or more.
• System recognizes white (yellow) lines.
• Width of traffic lane is approximately 9.8 ft. (3 m) or more.
• Turn signal lever is not operated.
• Vehicle is driven on a straight road or around a gentle curve with a radius
of more than approximately 492 ft. (150 m).
• No system malfunctions are detected. (→P. 567)
Steering control function
This function operates when all of the following conditions are met in addi-
tion to the operation conditions for the lane departure alert function.
• Setting for "Steering Assist" on
to "On".(→P. 110)
• Vehicle is not accelerated or decelerated by a fixed amount or more.
• Steering wheel is not operated with a steering force level suitable for
changing lanes.
• ABS, VSC, TRAC and PCS (Pre-Collision System) are not operating.
• TRAC or VSC is not turned off.
• Hands off steering wheel alert is not displayed. (→P. 289)
Vehicle sway warning
This function operates when all of the following conditions are met.
• Setting for "Sway Warning" on
to "On". (→P. 110)
• Vehicle speed is approximately 32 mph (50 km/h) or more.
• Width of traffic lane is approximately 9.8 ft. (3 m) or more.
• No system malfunctions are detected. (→P. 567)
HIGHLANDER_HV_U (OM48F12U)
of the multi-information display is set
of the multi-information display is set

Hide quick links:

Advertisement

Table of Contents

Troubleshooting

loading

Table of Contents