Toyota Highlander Hybrid 2017 Owner's Manual page 473

Test the HomeLink
3
grammed button and observing the indicator light:
● If the indicator light is solid/continuous, programming has been
completed and your device should activate when the Home-
®
Link
● If the indicator light blinks rapidly for 2 seconds and then turns
into a solid/continuous light, proceed to the heading "Program-
ming a rolling code system".
Repeat the steps above to program another device for any of the
4
remaining HomeLink
■
Programming a rolling code system
Locate the "learn" or "smart"
1
button on the garage door
opener motor in the garage.
This button can usually be found
where the hanging antenna wire
is attached to the unit. The
name and color of the button
may vary
Please refer to the owner's man-
ual supplied with the garage
door opener motor for details.
Press and release the "learn"
2
or "smart" button.
Perform
onds after performing
HIGHLANDER_HV_U (OM48F12U)
6-4. Using the other interior features
®
operation by pressing the newly pro-
button is pressed and released.
®
buttons.
by manufacturer.
within 30 sec-
3
.
2
473
6