310
4-5. Using the driving support systems
Things you should know
■
If you notice any symptoms
If you notice any of the following symptoms, refer to the likely cause
and the solution, and re-check.
If the symptom is not resolved by the solution, have the vehicle
inspected by your Toyota dealer.
The image is difficult to see
• The vehicle is in a dark area
• The temperature around the lens
is either high or low
• The outside temperature is low
• There are water droplets on the
camera
• It is raining or humid
• Foreign matter (mud etc.) is
adhering to the camera
• There are scratches on the cam-
era
• Sunlight or headlights are shining
directly into the camera
• The vehicle is under fluorescent
lights,
sodium
lights etc.
The image is blurry
Dirt or foreign matter (such as water
droplets, snow, mud etc.) is adher-
ing to the camera.
The image is out of alignment
The camera or surrounding area has
received a strong impact.
HIGHLANDER_HV_U (OM48F12U)
Likely cause
lights,
mercury
Solution
If this happens due to these causes,
it does not indicate a malfunction.
Back up while visually checking the
vehicle's surroundings. (Use the
monitor again once conditions have
been improved.)
To adjust the image on the rear view
monitor system screen. (→P. 359)
Flush the camera with a large quan-
tity of water and wipe the camera
lens clean with a soft and wet cloth.
Have the vehicle inspected by your
Toyota dealer.