554
7-3. Do-it-yourself maintenance
■
Rear turn signal lights
Open the back door and
1
remove the cover.
Insert a flathead screwdriver
into the cover and remove it as
shown in the illustration.
To prevent damaging the vehi-
cle, wrap the flathead screw-
driver with a tape.
Remove the 2 screws, and
2
remove the lamp assembly
by pulling it directly backward
from the rear of the vehicle.
Remove the wire harness.
3
Turn the bulb base counter-
4
clockwise.
HIGHLANDER_HV_U (OM48F12U)