Toyota Highlander Hybrid 2017 Owner's Manual page 128

128
3-2. Opening, closing and locking the doors
■
Switching the door unlock function
It is possible to set which doors the entry function unlocks using the wireless
remote control.
1 Turn the power switch off.
2 When the indicator light on the key surface is not on, press and hold
or
.
The setting changes each time an operation is performed, as shown below.
(When changing the setting continuously, release the buttons, wait for at least
5 seconds, and repeat step
Multi-information
display
For vehicles with an alarm: To prevent unintended triggering of the alarm,
unlock the doors using the wireless remote control and open and close a door
once after the settings have been changed. (If a door is not opened within 60
seconds after
will automatically be set.)
In case that the alarm is triggered, immediately stop the alarm. (→P. 94)
HIGHLANDER_HV_U (OM48F12U)
for approximately 5 seconds while pressing and holding
2 .)
Unlocking function
Holding the driver's door handle
unlocks only the driver's door.
Holding a passenger's door
handle unlocks all the doors.
Holding a door handle unlocks
all the doors.
is pressed, the doors will be locked again and the alarm
,
Beep
Exterior:
Beeps 3 times
Interior:
Pings once
Exterior:
Beeps twice
Interior:
Pings once