Toyota Highlander Hybrid 2017 Owner's Manual page 331

■
Turning off both TRAC and VSC systems
To turn the TRAC and VSC systems off, press and hold
seconds while the vehicle is stopped.
The VSC OFF indicator light will come on and "Traction Control Turned Off"
will be shown on the multi-information display.
Press again to turn the systems back on.
*
: Pre-collision brake assist and pre-collision braking will also be disabled.
(→P. 281)
■
When the message is displayed on the multi-information display show-
ing that TRAC has been disabled even if
pressed
TRAC cannot be operated. Contact your Toyota dealer.
■
Operating conditions of hill-start assist control
When the following four conditions are met, the hill-start assist control will
operate:
●
The shift lever is in a position other than P or N (when starting off forward/
backward on an upward incline).
●
The vehicle is stopped.
●
The accelerator pedal is not depressed.
●
The parking brake is not engaged.
■
Automatic system cancelation of hill-start assist control
The hill-start assist control will turn off in any of the following situations:
●
The shift lever is moved to P or N.
●
The accelerator pedal is depressed.
●
The parking brake is engaged.
● Approximately 2 seconds elapse after the brake pedal is released.
■
Sounds and vibrations caused by the ABS, brake assist, VSC, TRAC,
hill-start assist control systems
Any of the following conditions may occur when the above systems are oper-
ating. None of these indicates that a malfunction has occurred.
● Vibrations may be felt through the vehicle body and steering.
●
A motor sound may be heard also after the vehicle comes to a stop.
HIGHLANDER_HV_U (OM48F12U)
4-5. Using the driving support systems
*
331
for more than 3
switch has not been
4