Toyota Highlander Hybrid 2017 Owner's Manual page 110

110
2. Instrument cluster
Settings display
Select
1
Select an item and then set it with the center button.
2
■
LDA (Lane Departure Alert with steering control) settings
→ P. 669
■
PCS (Pre-Collision System) settings
→ P. 669
■
BSM (Blind Spot Monitor) settings (if equipped)
Select to activate/deactivate the BSM (Blind Spot Monitor).
( → P. 669)
■
Meter settings
● Language
Select to change the language on the display.
● Units
Select to change the unit of measure for fuel consumption.
● Maintenance system (for U.S.A)
Select to reset the maintenance data after the required mainte-
nance is performed. (
● EV Indicator Light
Select to activate/deactivate the EV Indicator Light.
●
switch settings
You can register 1 screen as the top screen. To register, press
and hold
● Drive information 1 through 3
Select to select up to 2 items that will be displayed on a Drive
information screen, up to 3 Drive information screens can be set.
● Pop-up display
Select to set the following pop-up displays, which may appear in
some situations, on/off.
• Route guidance display of the navigation system-linked sys-
tem (if equipped)
• Incoming call display of the hands-free phone system
• Instrument panel brightness adjustment display
HIGHLANDER_HV_U (OM48F12U)
using the meter control switches.
→ P. 498)
while the desired screen is displayed.