Installation; Checking Before Installation - Huawei SmartLogger2000 User Manual

SmartLogger2000
User Manual
About This Chapter
This topic describes how to install the SmartLogger.
Context
Install the SmartLogger in an appropriate position and surface.



3.1 Checking Before Installation

3.2 Preparing Tools
3.3 Determining the Installation Position
3.4 Installing the SmartLogger
3.5 Installing the RS485 signal SPD
3.1 Checking Before Installation
Checking Outer Packing Materials
Check the outer packing materials for damage before unpack the SmartLogger, such as holes
and cracks. If any damage is found, do not unpack the SmartLogger and contact the dealer as
soon as possible.
(2016-06-20)
Do not store the SmartLogger in areas with flammable or explosive materials.
Do not install the SmartLogger on flammable building materials.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3

Installation

3 Installation
22