Huawei SmartLogger2000 User Manual page 81

SmartLogger2000
User Manual
Context
USB flash drives of SanDisk, Netac, and Kingston are recommended. Other brands may be
incompatible.
Procedure
Step 1 Insert the USB flash drive into the USB port at the bottom of the SmartLogger.
Step 2 Log in to the APP, and choose More > System Maintenance > Generate Local Maint.
Script on the main menu page. For details, see SUN2000 APP User Manual.
Step 3 The SmartLogger automatically executes all commands specified in the boot script file. View
the LED indicator to determine the operating status.



Table 6-3 Indicator status
Indicator (Silk Screen)
ALM
----End
(2016-06-20)
The generated script file will replace the script file for full file export in the USB flash drive.
Verify that the USB flash drive contains a boot script file; otherwise, the SmartLogger
cannot execute the operations.
If SmartLoggers have the same APP login password, the boot script file generated by one
SmartLogger can be used in other SmartLoggers. If the SmartLogger to which files are
imported have a different password, you need to generate a new boot script file in the
SmartLogger.
The initial APP login password of the SmartLogger is 00000a. Change it upon the first
login.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Status
Off
Blinking green at long
intervals (on for 1s and then
off for 1s)
Steady green
Blinking green at short
intervals (on for 0.125s and
then off for 0.125s)
6 User Interface
Meaning
No local maintenance is
underway.
Local maintenance is in
progress.
Local maintenance
succeeds.
Local maintenance fails.
75