Scanning Temperatures - Viessmann Vitotronic 100 HC1 User's Manual And Operating Instructions

Scanning Options

Scanning Temperatures

36
Subject to the connected components and settings you have made, you can scan
the current temperatures and operating conditions.
To exit the setting mode at any time, press the following keys:
1. / / for the required heating
3
circuit.
2. for "Participant No."
Order in which temperatures and operating conditions may be
scanned:
Participant no.
Holiday program - if one has entered
Departure date
Return date
Current Outdoor temperature
Boiler sequence
Common supply temperature - if a
sensor is connected
Boiler water temperature 1-4 (for each
boiler)
Flue gas temperature - if a flue gas
sensor is connected
Sensor aJA - if a sensor is
connected
Sensor aJB - if a sensor is
connected
DHW temperature - DHW temperature
DHW temperature 1 - DHW
temperature, if two tank temperature
sensors are connected
DHW temperature 2 - DHW
temperature, if two tank temperature
sensors are connected
Supply temperature - for heating
circuit with mixing valve
Normal room temperature - actual
value, if a remote control unit is
connected
Solar DHW temperature - DHW
temperature with solar operation
Collector temperature - in conjunction
with a solar heating system
Solar energy - display in kWh, in
conjunction with a solar heating
system
3.⊕/ for further scanning of the
list.
4. to end scanning.
Time
Date
Burner ON / OFF
Output 20 ON / OFF
Output 29 ON / OFF
Output 52 OPEN / CLOSE
0 Close
1 to 99 (%)
100 Open
DHW tank pump ON / OFF
C pump ON / OFF - DHW recirculation
pump
Heating pump ON / OFF - heating
circuit pump
Mixing valve OPEN / CLOSE
0 Close
1 to 99 (%)
100 Open
Solar pump ON / OFF - in conjunction
with a solar heating system
Solar pump ...h - solar circuit pump
hours run, in conjunction with a solar
heating system
Language