Viessmann Vitotronic 100 HC1 User's Manual And Operating Instructions page 2

Vitodens 200-w, wb2b series multi-boiler system with control units for operation with a constant temperature and weather-compensated cascade control unit for operation with natural gas and liquid propane gas
Table of Contents

Advertisement

Safety, Installation and Warranty Requirements
Safety, Installation and Warranty Requirements
Please ensure that these instructions are read and understood before commencing installation. Failure to comply with the instructions
listed below and details printed in this manual can cause product / property damage, severe personal injury, and/or loss of life. Ensure
all requirements below are understood and fulfilled (including detailed information found in the manual subsections).
H Licensed professional heating
contractor
The installation, service, and
maintenance of this equipment must
be performed by a licensed
professional heating contractor.
"
Please see section
entitled "Important
Regulatory and
Installation
Requirements" in the
Installation Instructions.
H Product documentation
Read all applicable documentation
before commencing installation. Store
documentation near boiler in a readily
accessible location for reference in the
future by service personnel.
"
For a listing of
applicable literature,
please see section
entitled "Important
Regulatory and
Installation Requirements"
in the Installation Instructions.
H Advice to owner
Once the installation work is
complete, the heating contractor must
familiarize the system operator /
ultimate owner with all equipment, as
well as safety precautions /
requirements, shut-down procedure,
and the need for professional service
annually before the heating season
begins.
2
H Carbon monoxide
Improper installation, service and/or
maintenance can cause flue products
to flow into living space. Flue
products contain poisonous carbon
monoxide gas.
"
For information
pertaining to the proper
installation, service and
maintenance of this
equipment to avoid
formation of carbon monoxide, please
see the Installation Instructions of the
Vitodens 200-W Direct Vent System.
WARNING
Installers must follow local
regulations with respect to
installation of carbon monoxide
detectors. Follow manufacturer's
maintenance schedule of boiler.
H Equipment venting
Never operate boiler without an
installed venting system. An improper
venting system can cause carbon
monoxide poisoning.
H Warranty
Information contained in
this and related product
documentation must be
read and followed. Failure
to do so renders warranty
null and void.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vitotronic 300-k mw2

Table of Contents