Selecting Constant DHW Heating
Selecting DHW Heating for a Few Hours Only
(continued)
Press the following keys if you want to delete a time phase:
1.
/
/
for the required heating
3
circuit.
12. uw
for "DHW time program".
3.
until the required "DHW cycle
Off" is displayed.
The following functions enable you to heat DHW for several hours, without
permanently altering your control settings. For this, select "Party mode g". During
party mode, the DHW recirculation pump is active and central heating operates with
the party temperature. Set the party temperature to 4ºC / 39.2ºF, if you require no
central heating (e.g. in summer).
Press the following keys:
1.
/
/
for the required heating
3
circuit.
12. g
for "Party mode"; the party
temperature flashes.
/
for the required temperature,
13.
if you want to change the
room temperature.
Selecting DHW Heating
4.
until "--:--" is displayed for
the end time.
5.
to confirm, until the boiler
water temperature is
displayed.
to confirm; the temperature
14.
no longer flashes and is
saved.
Ending party mode
Party mode ends automatically
with the next changeover to
central heating with normal room
temperature, but no later than
after 8 hours.
If you want to prematurely
terminate party mode, press
and g; the key illumination
3
extinguishes.
,
or
27