Seatex Seapath 200 Installation Manual, rev. 13
8.3.4
Help menu
Pull down the Help menu. Click on the About SCC option and the About SCC window
below appears. A scroll window contains information about Company, software version and
the software application.
8.3.5
Tool buttons
Description of tool buttons (from left to right):
• Open Configuration (Self-explanatory)
• Save Configuration (Self-explanatory)
• Connect to Seapath (Establishes data communication from SCC to Seapath)
• Disconnect from Seapath (Disconnects data communication between SCC and Seapath)
• SCC-Seapath Port Configuration (See chapter 8.2.2, "Setting the serial port parameters")
• MRU Configuration Wizard (See chapter 8.4.3.1, "MRU geometry")
• GPS Antenna Calibration Wizard (See chapter 8.4.2.5, "GPS antenna configuration")
• Print Configuration (Not yet implemented)
• About (See chapter 8.3.4 for details)
Appendix D – Seapath configuration software, SCC
Figure 26 About SCC
Figure 27 Tool Buttons
78