穿線方法
請確實按照圖示各種不同縫合情況穿線,錯
誤之穿線將引起斷線、跳針及車縫不平坦等
現象,請參照穿線圖。
* 薄布料請參考 ( 圖 20)
* 中厚布料請參考 ( 圖 21)
拉線鬆緊度調整
拉線強弱必須根據:
1. 車縫布料種類
2. 材質厚薄
3. 線
4. 縫距
等不同而做調整,將控制鈕順時鐘方向旋轉
時,線越緊,反之則越鬆。( 圖 20、21)
P22
THREADING
Please thread truly by different seam types.
The fault threading will cause broken lines,
skipping stitch, puckering defects. Please
refer to threading instructions.
*Fine fabrics are followed to Fig.20
*Medium and heavy fabrics are followed to
Fig.21.
圖 20/Fig.20
ADJUST THREAD TENSION
The tension of the thread should be adjusted
according to:
1.The fabric material type
2.The thickness of the sewed fabric
3.The thread;
4.The stitch length.
Turn the tension button clockwise, and
thread becomes tighter. If you turn it counter-
clockwise, it becomes looser.(Fig .20.21)
圖 21/Fig.21