Canon DR-9080C Service Manual page 87

3) Rotate the delivery tray assembly
Remove six screws
and release the front claw
frontward.
Release two collars
upper and lower eject tray assemblies.
Note: Be careful not to damage the claw since it
is breakable.
Delivery tray assembly
Screw
Front claw
Fig. 3-113
4) Release the boss
the IP cover to separate it from the upper
delivery cover .
IP cover
Upper delivery cover
Fig. 3-114
COPYRIGHT © 2003 CANON ELECTRONICS INC. CANON DR-6080/9080C FIRST EDITION OCT. 2003
.
, unhook two claws
by sliding it
and detach both the
Claw
Collar
on each side by bending
Boss
CHAPTER 3 DISASSEMBLY & REASSEMBLY
6. Front delivery cover
,
1) Detach the upper delivery cover assembly.
2) Remove four screws
, and take off the front delivery cover
lifting it upward.
Screw
Front delivery cover
, pull down the roller
Roller cover
Fig. 3-115
by
3 - 5