List Of Connectors, Switches & Leds For Each Pcb - Canon DR-9080C Service Manual

X. LIST OF CONNECTORS, SWITCHES & LEDS
FOR EACH PCB
Shown below are the connectors, setting
switches and LEDs for the main CPU PCB,
pick-up control PCB, and the document tray
control PCB.
The electrical parts not included in the list
are set by the factory, and the adjustment or
checking of these parts requires special tools and
1. Main CPU PCB (MAIN_DCON)
J140
J137
J117
J114 J124
COPYRIGHT © 2003 CANON ELECTRONICS INC.
J136
J139
J131
LED104
LED106
LED101
J124
CANON DR-6080/9080C REV.0 SEPT. 2003
CHAPTER 2 FUNCTIONS & OPERATION
measuring instruments as well as special skill.
Therefore, take care not to touch these parts. Do
not use the parts labeled "DO NOT USE."
Note: This machine does not include any
potentiometers that requires adjustment in
the market.
J135 J132
J121 J105
Fig. 2-1001
SW102
2 - 53