Canon DR-9080C Service Manual page 135

No.
9 Rotate the other tip of the IP shaft in the
direction of the arrow and then insert it into the
hole inside the left side of the main body.
10 Attach the resin clip to the right end of the IP
shaft to secure it.
11 Insert the snap band attached to the cable
assembly of the IP carriage into the hole located
at the center of the main body upper frame.
COPYRIGHT © 2003 CANON ELECTRONICS INC. CANON DR-6080/9080C FIRST EDITION OCT. 2003
Procedure
CHAPTER 4 INSTALLATION & MAINTENANCE
Inspection/Remarks
4 - 7