Canon DR-9080C Service Manual page 113

Precautions during assembly
• Align the holes to the positioning bosses
(one on each side) and install the platen unit
using two screws
screws into the machine.
Positioning boss
Platen unit
Fig. 3-324
COPYRIGHT © 2003 CANON ELECTRONICS INC. CANON DR-6080/9080C FIRST EDITION OCT. 2003
. Be careful not to drop the
Screw
CHAPTER 3 DISASSEMBLY & REASSEMBLY
11. Lower reading roller
1) Detach the platen unit. For details, refer to
the section entitled "Front platen roller".
2) Unfasten two E-rings
the pulley , pin
(one on each side) in sequence, and then
detach the lower reading roller
E-ring
Pin
Lower reading roller
Fig. 3-325
Precautions during assembly
• Be sure to install the pulley with the flange
correctly oriented. The pulley for the lower
reading roller is flanged on the inside.
(one on each side),
, and two bearings
.
Pulley
Bearing
3 - 31