Canon DR-9080C Service Manual page 121

2. Pick-up control PCB (80-SUB)
1) Detach the upper delivery cover assembly.
2) Unhook all connectors connected to the
pick-up control PCB, remove two screws
and then detach the pick-up control PCB
while removing two stoppers
Pick-up control PCB
Stopper
Fig. 3-503
Precautions during assembly
• Make sure that every cable is connected and
securely inserted.
• Do not pull in the cables. Fix them using cable
clamps.
COPYRIGHT © 2003 CANON ELECTRONICS INC. CANON DR-6080/9080C FIRST EDITION OCT. 2003
,
.
Screw
CHAPTER 3 DISASSEMBLY & REASSEMBLY
3. Document tray control PCB
(10-SUB)
1) Detach the right cover assembly.
2) Unhook all connectors connected to the
document tray control PCB
one screw A
(self-tapping) .
Document tray control PCB
Screw A
Fig. 3-504
3) Disconnect two connectors
the back side of the document tray control
PCB .
Document tray control PCB
Connector
Fig. 3-505
and remove
and two screws B
Screw B
attached to
3 - 39