Canon DR-9080C Service Manual page 111

9. Lower registration roller
1) Detach the right/left cover assembly.
2) Detach the lower entry guide plate cover and
the lower entry guide plate. Refer to the
section entitled "Retard motor".
3) Detach the registration clutch.
4) Remove two E-rings
and two bearings
lower the lever
registration roller
E-ring
Lever
Lower registration roller
Fig. 3-320
COPYRIGHT © 2003 CANON ELECTRONICS INC. CANON DR-6080/9080C FIRST EDITION OCT. 2003
(one on each side)
(one on each side), and
to detach the lower
.
Bearing
CHAPTER 3 DISASSEMBLY & REASSEMBLY
Precautions during assembly
• Lower the lever
and install the lower
registration roller
right-side plate so that it is positioned at the top.
Lever
Lower registration roller
Fig. 3-321
into the hole in the
3 - 29